Apprentice Plumber Tool List UK (2026): The Starter Kit You Actually Need

Plumbing tools get used hard, so the starter kit is about a handful of reliable tools rather than a big set. This list covers what most UK apprentice plumbers need first for copper pipework, fittings and taps.

Some links on this page are affiliate links, we may earn a commission if you sign up, at no extra cost to you.

Quick answer

Start with 15mm and 22mm pipe slices, an adjustable tube cutter for awkward sizes, Knipex Cobra water pump pliers, a quality adjustable spanner, a basin wrench and a 15/22mm pipe bender. Add a tape measure, a knife and a torch, and you have a kit that covers most first-year work.

How we chose: these are tools UK trades commonly start with, picked from established trade brands. We have not hands-on tested each product, so we only state what the manufacturers and their Amazon UK listings confirm. Your college or employer may give you a required list, so check it first. Check current prices on Amazon, as they change often.

Apprentice Plumber Tool List

ToolWhy you need itOur pick
Pipe slicesFast, square cuts on 15mm and 22mm copperMonument Autocut twin pack
Tube cutterCutting other sizes and tight spotsRothenberger 30 PRO
Water pump pliersGripping nuts, fittings and pipeKnipex Cobra 250
Pliers wrenchChrome fittings without marking themKnipex Pliers Wrench 250
Adjustable spannerCompression fittings and nutsBahco 9072 10 inch
Basin wrenchTap nuts behind basins and sinksMonument MON341J
Pipe benderBends in 15mm and 22mm copperRothenberger Multibender

The Essential Tools

1. Monument Autocut 15mm and 22mm Twin Pack

Best pipe cutters

Autocuts clamp around 15mm or 22mm copper and cut cleanly with a few turns. Monument says they need less effort than a hacksaw, cut more accurately and carry less risk of slipping, which matters when you are making dozens of cuts a day.

Check price on Amazon

2. Rothenberger 30 PRO Tube Cutter

Best adjustable tube cutter

The 30 PRO cuts copper, brass, aluminium and thin-walled steel pipe from 3 to 30mm, so it covers the sizes your slices do not. It has a folding de-burrer and a spare cutting wheel stored in the handle.

Check price on Amazon

3. Knipex Cobra 250mm Water Pump Pliers

Best pliers

The Cobra adjusts with a button directly on the workpiece, self-clamps on pipes and nuts so it does not slip, and has teeth hardened to around 61 HRC. Most plumbers end up owning at least one.

Check price on Amazon

4. Knipex Pliers Wrench 250mm

Best for chrome fittings

The pliers wrench has smooth parallel jaws with zero backlash, so it grips chrome and plated fittings without chewing the edges. Knipex lists high lever transmission for strong grip.

Check price on Amazon

5. Bahco 9072 Ergo 10 inch Adjustable Spanner

Best adjustable spanner

A non-slip grip, an mm scale for pre-setting the jaw, and a jaw that Bahco says will not fall out even at full opening. A good adjustable is used on almost every job.

Check price on Amazon

6. Monument MON341J Basin Wrench

Best basin wrench

A swivelling head reaches tap nuts where fixed spanners cannot, with a removable tommy bar and small and medium jaws for 1/2 and 3/4 inch nuts.

Check price on Amazon

7. Rothenberger Multibender 15-22mm

Best pipe bender

A lightweight, portable bender for the industry-standard 15mm and 22mm sizes, supplied with guides. Rothenberger lists it for plumbers, heating engineers and gas fitters.

Check price on Amazon

Tips for Building Your First Kit

  • Buy quality pliers once. Cheap water pump pliers slip and round off nuts.
  • Keep a spare slice. Pipe slices get dropped and lost, and they are cheap to replace.
  • Ask about press tools and blowtorches. These are often supplied by employers.
  • Look after your cutters. Clean de-burred cuts make soldered and push-fit joints far more reliable.

Frequently Asked Questions

What tools does an apprentice plumber need?

Most UK apprentice plumbers start with 15mm and 22mm pipe slices, a tube cutter, water pump pliers, an adjustable spanner, a basin wrench, a 15/22mm pipe bender, a tape measure, a knife and a torch.

What are the best pliers for plumbers?

Knipex Cobra water pump pliers are a long-standing favourite thanks to push-button adjustment and self-locking jaws. The Knipex pliers wrench is popular for chrome fittings.

Do I need a pipe bender as an apprentice?

A 15/22mm bender is useful early on for neat pipe runs, and many employers expect apprentices to learn bending by hand.

Related Guides

As an Amazon Associate, TradeStack HQ earns from qualifying purchases. Some links on this page are affiliate links, we may earn a commission if you buy, at no extra cost to you. Product details are taken from manufacturer and Amazon UK listings as of October 2026.

Similar Posts